Need a Hytrol Conveyor Spare Part?

Written By: Bastian Solutions

Hytrol FO Sticker

Let’s face it, material handling equipment, especially conveyors, typically have a lot of moving parts.  Over time, just like anything else, these parts can fail.  Usually the maintenance department has a spare handy, but what about those parts that weren’t included in the last spare parts order?

What if you don’t know what the heck this grease-covered thing is sitting on your desk with a note saying, “We need one of these”?  “Geez thanks, I will get right on it!”, is what I would be thinking.

To help you get what you need, here are a few things that would be good to have when you contact Bastian Solutions or Hytrol.  Some of these items will tell Hytrol exactly what conveyor this part is for.  They can even see when the conveyor was made and who bought it, even if you aren’t the original owner.

These items are listed in order from most important to some-what important when shopping for Hytrol spare parts.  Either way, we can help you find what’s needed.

  1. FO Number
  2. Serial Number – When a conveyor ships from Hytrol, a sticker, like the one above, is attached to the side rail. The FO # and Serial # are specific to that conveyor.
  3. Part-number with description – On some parts, the part number is stamped on a surface.
  4. Model of conveyor – Example: Hytrol Model TA
  5. Conveyor Type – For example: Belt driven, chain driven, or gravity conveyor
  6. Overall width – Some parts are specific to the size of the conveyor

As mentioned, these items can help you find what you need.  If you need a Hytrol spare part, simply give us a call.  We try to be the best competitive distributor out there, and we have a  spare parts store as well.  Simply enter the part number and you’re off. Can’t find what you need?  Give us a call or send us an email, and we will get your part on order today.

Shop for Hytrol spare parts

Shop and compare Hytrol spare parts.

Bastian Solutions is an independent system integrator dedicated to helping our customers increase their productivity through proven automation, information systems, and sound operating procedures.

Tags: , , , , ,

2 comments

  1. Daniel Schmidt says:

    Hello I have a Hytol conveyor that the motor blew the stick on the motor you cannot read anymore and we were trying to find out if there was a way to get the specs off that motor. The model number is a TA ser# 182365. If there is any way to see what you have it would be great or if you need anything from me please let me know. Thanks for you help and time.

  2. Hi Daniel and thank you for your question. We would be happy to help you determine the specs on your Hytrol motor. If it’s okay, can we email you to get additional details?

Leave a Reply

Your email address will not be published.