Unplated Steel Gravity Roller Conveyor - 5' Long x 22" Wide 1.9" Diameter x 9 Gauge
Photo's, Video's, and Dimensions
Equipment Downloads
Related Items
Model #: 199SR-22-4-50-5-HYT
Ships Within 24 Hours.
Overall Length
Overall Width
Roller Centers
Recalculating...
Equipment Options
Base Price: $187.45
ColorEdit
$0.00Green Floor Support HeightEdit$87.8827-3/4" to 39-3/4" Adjustable floor supports with a height range of 27-3/4" to 39-3/4" to top of conveyor elevation.
Note: Floor Support quantities are determined automatically using the industry standard calculation of 1 support per 10 ft. in length plus 1. However, you may change the quantity in the Shopping Cart based on your specific application.
Guard RailsEdit$0.00No Guard Rail Height - DischargeEdit$0.0030" Conveyor elevation to the top of the belt is 30".
Height - InfeedEdit$0.0030" Conveyor elevation to the top of the belt is 30".
Package StopsEdit$0.00None Angle End Stop Assembly - 22" Overall Width $15.31
22" Overall Width, 1.5" x 1.5" x 12 gauge powder painted steel
Price: $187.45
Shipping Weight: 122 lbs.
Shipping Estimate: $83.85 each
Specifications
| Overall Length |
5 ft. |
| Overall Width |
22 in. |
| Between Rail Width |
19 in. |
| Frame Capacity |
620 lbs. Maximum Distributed Load Capacity Per Foot with 5 ' Support Centers, 118 lbs. Maximum Distributed Load Capacity Per Foot with 10 ' Support Centers |
| Capacity |
250 lbs. maximum load per roller |
| Roller Centers |
4.5 in. |
| Axles |
7/16 inch hex shaft, spring loaded |
| Finish |
Powder Painted Green |
| Frame |
3.5 or 4.5 inch deep x 1.5 inch flange x 10 gauge formed steel channel with bolt in cross members |
| Couplings |
Bolt on type for bolting sections together. |
| Rollers |
1.9 inch diameter x 9 gauge unplated steel tubing. Bearings are labryinth sealed and grease packed. Note: Unplated rollers may lightly rust if exposed to moisture. |
Description
This 1.9”x9 gauge ungalvanized steel gravity roller conveyor is perfect for conveying heavier product in a permanently installed situation. The 1.9” diameter rollers are constructed with 16 gauge steel giving this conveyor a capacity equal to 250 lbs per roller. The rollers can be placed on 2.25”, 3”, 4.5”, 6”, 9”, or 12” centers depending on the type of application needed. Smaller or irregular shaped products tend to convey well with small roller spacing. The overall conveyor capacity increases as the roller center spacing decreases. Because this conveyor isn't galvanized, moist or wet environments should be avoided to prevent rust forming on the roller surface. Just as a rule of thumb when selecting roller spacing, a minimum of three rollers under the product being conveyed is suggested.
Guarantee
Hytrol Conveyor Company, Inc. warrants that goods sold by Hytrol and shipped on or after January 1, 2003 will be free from defects in material and workmanship for a period of one year from date of shipment, or 4,200 hours of operation, whichever occurs first. Hytrol’s sole obligation under this warranty shall be to repair or replace, at Hytrol’s option, FOB-Jonesboro, AR, any part or goods proving defective within the terms and period of this warranty. Buyer must provide Hytrol immediate written notice of the claimed defect, including a description of the goods, the defect, and the date of its discovery. Hytrol reserves the right to inspect the part or goods at the buyer’s location. Buyer shall bear responsibility for the cost of labor and other charges for removal of defective part or goods