Zero Pressure Accumulation Live Roller Conveyor 1.9" Roller - 20' Long x 24" Wide

Zero Pressure Accumulation Live Roller Conveyor 1.9" Roller - 20' Long x 24" Wide
Click here to see more pictures and videos
Photo's, Video's, and Dimensions
  • 3d Viewer
  • Product View
  • Product View
  • Application View
  • Application View
  • Application View
  • Application View
  • Application View
  • Application View
  • Front View Drawing
  • Side View Drawing
  • Watch Accumulation Conveyor Video
  • Watch E-Z Logic Sensor Simulation
Equipment Downloads
Related Items
Model #: ABEZ-21-24-3-20-24-HYT
Ships In 1 Week.

Overall Length Overall Width Change Conveyor Loading...please waitRecalculating...
Equipment Options Base Price: $5,820.90
ColorEditClose OptionSave Option$0.00Green
Green
Conveyor SpeedEditClose OptionSave Option$0.0065 Feet Per Minute
65 Feet Per Minute
Speed of 65 Feet Per Minute (FPM).  The speed of the conveyor and total distributed load may affect the necessary horsepower of the motor
EZ Logic AccessoryEditClose OptionSave Option$135.14Push Button Programmer (Recommended)
Push Button Programmer (Recommended) $135.14
Push Button Programmer (Recommended)

Plugs into auxiliary port of any controller to configure certain features of controller. Required for customization of factory default settings.

EZ Logic Sensor TypeEditClose OptionSave Option$0.00EZ Logic Controller Module - Retro-Reflective Sensor - Left Side
EZ Logic Controller Module - Retro-Reflective Sensor - Left Side
A retro-reflective photo-eye is one that uses a reflector and a module that uses a beam of light to determine when an item is passed in front of it. If the light is returned to the module then its path is clear, if the light doesn’t return then the module knows an item has been detected. Advantages – full-width sensing and independent of carton reflectivity. Retro-Reflective sensors are the recommended sensor for most applications unless side access (objects being loaded from the side) or carton-sensing limitations (package height) are necessary.
Floor Support HeightEditClose OptionSave Option$137.0130-3/8" to 42-3/8"
Floor Support Height - 30-3/8" to 42-3/8"
Adjustable floor supports with a height range of 30-3/8" to 42-3/8" to top of conveyor elevation.

Note: Floor Support quantities are determined automatically using the industry standard calculation of 1 support per 10 ft. in length plus 1. However, you may change the quantity in the Shopping Cart based on your specific application.
Guard RailsEditClose OptionSave Option$0.00No Guard Rail
No Guard Rail
No Guard Rail Provided.
Height - DischargeEditClose OptionSave Option$0.0030"
30"
Conveyor elevation to the top of the roller is 30".
Height - InfeedEditClose OptionSave Option$0.0030"
30"
Conveyor elevation to the top of the roller is 30".
MotorEditClose OptionSave Option$0.001/2 HP, 230 V-3 Ph, 60 Hz, Totally Enclosed
1/2 HP, 230 V-3 Ph, 60 Hz, Totally Enclosed
1/2 HP, 230 Volt, 3 Phase, 60 Hz, motor with a totally enclosed C-face.
Optional DrivesEditClose OptionSave Option$0.00Center Drive, C-Face
Center Drive, C-Face
A center drive is mounted near the center of the conveyor and should be used in reversing or incline applications. A center drive is also ideal for longer conveyor lengths where a high load capacity is needed. The c-face drive is the most commonly purchased drive for a center mounted drive. The c-face drive's reducer ratio is not variable.
Price: $5,820.90
Shipping Weight: 1038 lbs. Shipping Estimate: $781.32 each
Quantity:
Loading... Add to Cart
Get Quote

Specifications

Overall Length 20 ft.
Overall Width 24 in.
Bed Width 21 in.
Belt Width 6 in.
Drive Pulley 8" diameter with 1-3/16" diameter shaft at bearings, machine crowned.
Snub Idler Adjustable 2.125" diameter with pre-lubricated bearings. Guards included.
Return Idler Adjustable 1.9" diameter pre-lubricated ball bearings.
Speed Reduction Sealed worm gear C-face speed reducer. No. 50 roller chain to drive pulley.
Belt Type 6" Black Ultimate 140 SD.
Standard Speed 65 Feet Per Minute
Roller Centers 3"
Zone Length 24"
Zone Quantity 10

Description

The Zero Pressure Accumulating Live Roller Conveyor is a flat belt driven conveyor with the Electronic Logic System applied to allow Zero Pressure Accumulation in various zone lengths. The Electronic Logic System allows this conveyor to operate in three different modes to meet your current and future conveying through-put needs.

The Zero Pressure Accumulating Zones range in length from 12” up to 36” to fit a wide variety of products including cardboard boxes, plastic totes, as well as assembly pallets. There is no minimum weight requirement and up 150 pounds per foot for maximum product weight. Because of this flexibility, the Zero Pressure Accumulating Live Roller Conveyor can be found in a number of industries including Packaging/Distribution, Assembly, and Manufacturing.

The Electronic Logic System utilizes a simple in-field wiring system to allow ease of expansion or replacement if need be. This system also allows the conveyor to enter a sleep mode when the conveyor is not in use to lower noise levels as well as reduce wear on rollers and then automatically wake up when a product presents itself.

Additional Options

  • High Performance Underside Center Drive
  • Side Mounted Low Elevation Center Drive
  • Pressure Switch
  • V-Belt Drive
  • O-Ring Drive Chain
  • Package Stops
  • Plows
  • Roller Centers
  • Poly-Tier Supports
  • Ceiling Hangers
  • Motors
  • Electrical Controls
  • EZLogic

Guarantee

Hytrol Conveyor Company, Inc. warrants that goods sold by Hytrol and shipped on or after January 1, 2003 will be free from defects in material and workmanship for a period of one year from date of shipment, or 4,200 hours of operation, whichever occurs first. Hytrol’s sole obligation under this warranty shall be to repair or replace, at Hytrol’s option, FOB-Jonesboro, AR, any part or goods proving defective within the terms and period of this warranty. Buyer must provide Hytrol immediate written notice of the claimed defect, including a description of the goods, the defect, and the date of its discovery. Hytrol reserves the right to inspect the part or goods at the buyer’s location. Buyer shall bear responsibility for the cost of labor and other charges for removal of defective part or goods