Gapping Slider Bed Belt Conveyor - 12' Long x 24" Wide
Photo's, Video's, and Dimensions
Equipment Downloads
Related Items
Model #: GAP-18-21-24-12-HYT
Ships In 4 Weeks.
Overall Length
Overall Width
Recalculating...
Equipment Options
Base Price: $4,844.39
Chain GuardEdit
$0.00Left Side Chain Guard Chain guard is located on the left hand side when standing at the infeed end facing the discharge end.
ColorEdit$0.00Green Conveyor SpeedEdit$0.0065 Feet Per Minute Speed of 65 Feet Per Minute (FPM). The speed of the conveyor and total distributed load may affect the necessary horsepower of the motor
Floor SupportsEdit$137.0130-1/2" to 42-1/2" Adjustable floor supports with a height range of 30-1/2" to 42-1/2" to top of conveyor elevation.
Note: Floor Support quantities are determined automatically using the industry standard calculation of 1 support per 10 ft. in length plus 1. However, you may change the quantity in the Shopping Cart based on your specific application.
Guard RailsEdit$0.00No Guard Rail Height - DischargeEdit$0.0030" Conveyor elevation to the top of the roller is 30".
Height - InfeedEdit$0.0030" Conveyor elevation to the top of the roller is 30".
MotorEdit$0.00Dual Center Drive Assembly
Price: $4,844.39
Shipping Weight: 1059 lbs.
Shipping Estimate: $796.42 each
Specifications
| Overall Length |
12 ft. |
| Overall Width |
24 in. |
| Bed Width |
21 in. |
| Belt Width |
18 in. |
| Drive Pulley |
9 inch diameter with 1-11/16" diameter shaft at bearings, machine crowned and fully lagged. |
| Snub Idler |
Adjustable 2-1/2" diameter pre-lubricated ball bearings |
| Return Idler |
Adjustable 1.9 inch diameter pre-lubricated ball bearings |
| Speed Reduction |
Sealed worm gear C-Face speed reducer. No. 60 roller chain to drive pulley. |
| Discharge Tailpulley |
2-1/4" diameter with 3/4" diameter shaft at bearings, machine crowned |
| Belt Type |
High grip longitudinally grooved belt |
Description
The Gapping Slider Bed Belt Conveyor can be utilized within any industry that features sortation and/or product labeling or scanning equipment throughout the process. The Gapping Slider Bed Belt Conveyor consists of conveyors operating at a slightly greater speed than the incoming flow of cartons, which "pulls a gap" between adjacent cartons.
Historically, these gaps have been in the range of 12 to 18 inches, but with advanced sorters coming on, the gaps are shrinking to 8 inches or less. With the proper software and controls systems, the Gapping Slider Bed Belt Conveyor has the ability to do both dynamic and static gapping. This flexibility allows the Gapping Slider Bed Belt Conveyor to create an appropriately sized gap between products to ensure that down-stream processes such as the read rate during bar-code or photo eye scanning and sortation occur efficiently and with minimal errors.
Additional Options
- O-Ring Drive Chain
- Round End
- Guard Rails
- Motors
- Casters
- Electrical Controls
Guarantee
Hytrol Conveyor Company, Inc. warrants that goods sold by Hytrol and shipped on or after January 1, 2003 will be free from defects in material and workmanship for a period of one year from date of shipment, or 4,200 hours of operation, whichever occurs first. Hytrol’s sole obligation under this warranty shall be to repair or replace, at Hytrol’s option, FOB-Jonesboro, AR, any part or goods proving defective within the terms and period of this warranty. Buyer must provide Hytrol immediate written notice of the claimed defect, including a description of the goods, the defect, and the date of its discovery. Hytrol reserves the right to inspect the part or goods at the buyer’s location. Buyer shall bear responsibility for the cost of labor and other charges for removal of defective part or goods