500 lbs. Capacity 12" x 24" Backsaver Lite Lift Table

• Large Power Unites
  Higher horspower motors and hydraulics used to increase travel speed.
• Air Motor Driven Power Units
  For use where electrical actuation is undesirable and shop air is available; meets explosion proof requirements.
• DC Power Units
  Direct Current power units for use with battery power.
• External Power Unit
  Power unit is connected to lift only by hydraulic hoses.
• Cross Check Valving
  Locks oil in cylinders to eliminate deflection caused by oil transfer. Used in certain side loading applications.
• Power Units Ful JIC Style Continuous Running Power Units
  Continuous running power unit built to JIC specifications.
• No Coast ValvingFast acting hydraulic valving, which decreases upward coast, for use where more precise positioning is desired.
• Minimum Downdrift ValvingNear positive shut-off valving for use where platform must maintain position for extended periods of time.
• Continuous Running Power Units
  Heavy-duty power units with special cooling features. Power unit runs continuously, and valves are actuated to activate lift. Used for extremely high jogs or cycles.
• Double Acting CylindersFor special applications where it is necessary to provide both power up and power down.
• Air Bag Actuation
  Inflatable air bag provides limited travel lift actuation. Used where electrical power is not desirable or where only two positions are required.
• Continuous Duty Power Units
  Specially designed power units with motors capable of many motor starts per hour.
• Screw Jack
  Lift is actuated by gear motor driven worm or ball screw. For more precise, repetitive positioning or where hydraulics are not desired.
• Hot and Cold Temperature Hydraulic Packaging
  Special sealing and hydraulic fluids for use in hot or cold atmospheres.
• Velocity Fuse(s)/Excess Flow Protectors
  Hydraulic control prevents table free fall in the unlikely event of massive hydraulic failure.
• Automatic Leveling Package
  Optical sensing control positions table and stops travel at any preset height.
• Maintained Contact Controls
  Up/down/emergency stop push button control which stops travel automatically at preset level.
• Visual or Audible Signals
  Lights or bells used to warn personnel when lift is in operation
• Travel Limit Switch(es)
  Electrical switch stops travel, prevents overtravel, provides height positioning, and can activate associated equipment. Should be used with mechaniccal stop or fixed lowered height.
• Narrow Base
  Reduced width base to fit special needs. Must be lagged for stability.
• Wide Base
  Increased width base provides extra stability for wider loads.
• Sub Bases
  Extra base unit increases low height of standard designs. Provides a positive stop at predetermined down level. Frequently used for integration with automated systems.
• Lifting Eyes
  Steel eye bolts allow table to be lifted with a hoist.
• Lag Plates
  Premantly attached plates or angles with bolt holes for lagging a table to the floor.
• Increased Roll Over Capacity
  Structural strengthening of table support for use in pit installations where loaded trucks or transporters must travers the platform when it is in a lowered position.
• Powered Travers
  Hydraulic motor drives two wheels.
• Vee Groove Wheels
  Steel wheels with groove for use with inverted angle or Vee track to provide unidirectional movement.
• Flanged Wheels
  Steel wheels with flange for use on rail tracks.
• Push Bar
  Hand height bar for easier movement.
• Manual or Powered Turntables
  Bearing mounted and supported turntables for easy repositioning of loads.
• Tilting Tops
  30°, 45°, and 90° tilting platforms for postitioning loads.
• Access Plate
  Removable or hinged plate allows easier access to power unit and hydraulics in the lowered position.
• Anti-Skid Platform SurfacesDiamon tread platform surface or abrasive type paint provide for greater traction and reduce slipping.
• Vee Cradle Platform
  Vee shaped platform provides centering and secure handling of curved, round, or cylindrical loads.
• Fork Pockets
  Fork pockets allow entire unit to be easily lifted and moved by a fork truck.
• Stainless Steel Platform
  Corrosion and damage resistant surface for use with corrosive material.
• Wheel Chock
  Counter-weighted wheel chock will automatically engage as lift raises and prevent the lift from rolling.
• Special Paint
  Customer specified paint formulations and colors. Great for corrosion protection.
• Cam Follower Rollers
  Low friction leg rollers for increased efficiency and longer operating life.

Southworth Products Corp.

P.O. Box 1380
Portland, ME 04104-1380
Toll-Free: 800-743-1000
TEL: 207-878-0700
FAX: 207-797-4734

Southworth Products Corp. warrants this product to be free from defects in material or workmanship for a period of 2 YEARS of single shift usage from date of shipment, providing claim is made in writing within that time period. This warranty shall not cover modified designs for special applications, failure or defective operation caused by misuse, misapplication, negligence or accident, exceeding recommended capacities, failure to perform required maintenance or altering or repairing, unless alteration is authorized by Southworth Products Corp. Except as set forth herein, there are no other warranties, express or implied, including the warranties of merchantability and fitness for a particular purpose, all of which are hereby excluded. Southworth Products Corp. makes no warranty or representation with respect to the compliance of any product with state or local safety or product standard codes, and any failure to comply with such codes shall not be considered a defect of material or workmanship under this warranty. Southworth Products Corp. shall not be liable for any direct or consequential damages arising out of such noncompliance. Southworth Products Corp’s obligation under this warranty is limited to the replacement or repair of defective components at its factory or another location at Southworth Products Corp’s. discretion. This is buyer’s sole remedy. Except as stated herein, Southworth Products Corp. will not be liable for any loss, injury or damage to persons or property, nor for direct, indirect, or consequential damage of any kind, resulting from failure or defective operation of said product.