4000 lbs. Capacity Hydraulic Powered Pallet Positioner
Photo's, Video's, and Dimensions
Related Items
Model #: PPH4-24-SOUTH
Ships within 2 weeks.
Equipment Options
Base Price: $4,495.00
Bellows SkirtingEdit
$0.00None Bellows Skirting $585.00
The use of bellows skirts to protect the components of the lift is encouraged, to minimize dirt and debris from getting under the lift, to create a more aesthetically pleasing work environment, to reduce over spray on the hydraulic cylinders in paint booth application or to aid in “housekeeping”. These are all good reasons to consider bellows skirts on lift and tilters, but they should not be considered a “safety device”.
Accordion bellows skirts are a popular option, but it is in the best practices of the material handling industry to apply and refer to accordion or bellows skirts as “protective devices” not “safety devices or guards”. The lift industry does not present flexible accordion skirts as “safety devices” because they clearly do not meet the minimal requirements of the ANSI Standard, as it defines and promotes safety.
Disc CoverEdit$0.00No Cover LevelingEdit$0.00None One Touch Auto Leveling $995.00
Increase productivity in repositioning applications. Raise or lower lifts a specific increment at the touch of a button.
Voltage UpgradeEdit$0.00None
Price: $4,495.00
Shipping Weight: 760 lbs.
Shipping Estimate: $581.44 each
Specifications
| Capacity |
4000 lbs. |
| Platform Diameter |
43.625 in. |
| Lowered Height |
8.75 in. |
| Raised Height |
32.75 in. |
| Vertical Travel |
24 in. |
| Voltage / Phase / Hz |
115/1/60 |
Description
- When loads, weights, pallet sizes or product dimensions vary greatly, the powered Pallet Positioner with total operator control is the solution.
- A foot control allows the operator to adjust the load to an infinite number of positions up to full height of 32-3/4" (plus pallet height), so it is always at the most comfortable working height, thus minimizing lifting, bending and stretching.
- A flexible piece of equipment that features fork pockets to allow relocation within a facility and requires only a 115 volt power source to operate.
- Pallet turntable top uses low-friction bearings, so pallet rotation is smooth and easy to operate. Operator is always working on the near side.
Guarantee
Southworth Products Corp.
P.O. Box 1380
Portland, ME 04104-1380
Toll-Free: 800-743-1000
TEL: 207-878-0700
FAX: 207-797-4734
Southworth Products Corp. warrants this product to be free from defects in material or workmanship for a period of 2 YEARS of single shift usage from date of shipment, providing claim is made in writing within that time period. This warranty shall not cover modified designs for special applications, failure or defective operation caused by misuse, misapplication, negligence or accident, exceeding recommended capacities, failure to perform required maintenance or altering or repairing, unless alteration is authorized by Southworth Products Corp. Except as set forth herein, there are no other warranties, express or implied, including the warranties of merchantability and fitness for a particular purpose, all of which are hereby excluded. Southworth Products Corp. makes no warranty or representation with respect to the compliance of any product with state or local safety or product standard codes, and any failure to comply with such codes shall not be considered a defect of material or workmanship under this warranty. Southworth Products Corp. shall not be liable for any direct or consequential damages arising out of such noncompliance. Southworth Products Corp’s obligation under this warranty is limited to the replacement or repair of defective components at its factory or another location at Southworth Products Corp’s. discretion. This is buyer’s sole remedy. Except as stated herein, Southworth Products Corp. will not be liable for any loss, injury or damage to persons or property, nor for direct, indirect, or consequential damage of any kind, resulting from failure or defective operation of said product.