Heavy Duty Slider Bed Belt Conveyor - 22'-1" Long x 30" Wide
Photo's, Video's, and Dimensions
Equipment Downloads
Related Items
Model #: TL-24-34-22.08-HYT
Ships Within 24 Hours.
Overall Length
Overall Width
Recalculating...
Equipment Options
Base Price: $3,643.37
Chain GuardEdit
$0.00Left Side Chain Guard Chain guard is located on the left hand side when standing at the infeed end facing the discharge end.
ColorEdit$0.00Green Conveyor BeltEdit$0.00Black Ultimate 140 BOS The Ultimate 140 BOS is a nitrile impregnated belt with one side brushed with a thin coating of polyurethane. The Black Ultimate 140 BOS belt is ideal for the following applications:
- General purpose package handling
- High temperature applications
- Quiet applications
- Applications where an oil resistant belt is needed
Conveyor SpeedEdit$0.0065 Feet Per Minute Speed of 65 Feet Per Minute (FPM). The speed of the conveyor and total distributed load may affect the necessary horsepower of the motor
Drive SupportEdit$45.67Drive Support Leg for End Drive (Recommended) Floor Support HeightEdit$182.6830-3/8" to 42-3/8" Adjustable floor supports with a height range of 30-3/8" to 42-3/8" to top of conveyor elevation.
Note: Floor Support quantities are determined automatically using the industry standard calculation of 1 support per 10 ft. in length plus 1. However, you may change the quantity in the Shopping Cart based on your specific application.
Guard RailsEdit$0.00No Guard Rail Included Height - DischargeEdit$0.0030" Conveyor elevation to the top of the belt is 30".
Height - InfeedEdit$0.0030" Conveyor elevation to the top of the belt is 30".
MotorEdit$0.001 HP, 230 V-3 Ph, 60 Hz, Totally Enclosed 1 HP, 230 Volt, 3 Phase, 60 Hz, motor with a totally enclosed C-face.
Optional DrivesEdit$0.00End Drive - Discharge End The end drive is the most common powertrain used on belt conveyors that are less than 100 feet in length. End drives should not be used in reversible, incline, or high capacity applications.
Price: $3,643.37
Shipping Weight: 725 lbs.
Shipping Estimate: $556.28 each
Specifications
| Overall Length |
22.08 ft. |
| Bed Length |
20 ft. |
| Overall Width |
34 in. |
| Bed Width |
30 in. |
| Belt Width |
24 in. |
| Drive Pulley |
8" diameter with 1-3/16" diameter shaft at bearings, machine crowned and fully lagged. |
| Snub Idler |
Adjustable 2-1/8" diameter for tail end 2-1/2" for drive end, each with pre-lubricated bearings. Guards included. |
| Return Idler |
Adjustable 1.9" diameter pre-lubricated ball bearings. |
| Speed Reduction |
Sealed worm gear C-face speed reducer. No. 50 roller chain to drive pulley. |
Description
The Heavy Duty Slider Bed Belt conveyor features a simple design and rugged profile so that it can be used in areas of application that demand more weight capacity including totes, cartons, parts, and odd shaped items. The Heavy Duty Slider Bed Belt Conveyor is available in three belt widths for wide products, reversible when configured with a center drive, and is easy to install and configure. The Heavy Duty Slider Bed Belt Conveyor also features a metal bed that the belt rides along to provide smooth transportation of shock sensitive materials or to facilitate progressive assembly, sorting and packing, or inspection. It can also be used in an incline application with the use of the adjustable floor supports and/or ceiling supports.
Additional Options
- Overhead End Drive
- Side Mounted End Drive
- Center Drive
- Low Elevation Side Mounted Center Drive
- Stacked End Drive
- Shaft Mounted End Drive
- V-Belt Drive
- O-Ring Drive Chain
- Underside Take-Up
- Noseover
- Lower Powered Feeder
- Gravity Brackets
- Butt Couplings
- Pulleys
- Casters
- Poly-Tier Supports
- Ceiling Hangers
- Motors
- Electrical Controls
Guarantee
Hytrol Conveyor Company, Inc. warrants that goods sold by Hytrol and shipped on or after January 1, 2003 will be free from defects in material and workmanship for a period of one year from date of shipment, or 4,200 hours of operation, whichever occurs first. Hytrol’s sole obligation under this warranty shall be to repair or replace, at Hytrol’s option, FOB-Jonesboro, AR, any part or goods proving defective within the terms and period of this warranty. Buyer must provide Hytrol immediate written notice of the claimed defect, including a description of the goods, the defect, and the date of its discovery. Hytrol reserves the right to inspect the part or goods at the buyer’s location. Buyer shall bear responsibility for the cost of labor and other charges for removal of defective part or goods