Safety Mirrors

Safety mirrors are used for in-plant fork lift, pedestrian and other manual cart traffic safety. The bright, distortion-free image also provides excellent vision for quality inspection of assembly lines or machinery production areas. Safety Mirrors may also be used for outdoor installations in blind alleys, loading dock areas and parking ramps or garages. Safety mirrors are available in many styles and sizes to best meet your specific application(s).

Use recommendations: The mirror diameter in inches should equal the viewing distance in feet. (For example: a 16" diameter mirror should be used for viewing approximate. 16.ft away). If the mirror is to be used for security, a larger diameter is recommended because of image clarity.

360.degree hemispherical, ceiling mounted mirror

Properly positioned and suspended from the ceiling, this mirror allows sight around every blind corner, providing a view of an entire area and allowing in-plant vehicles and/or personnel traffic to move safely throughout the facility.

Screw-mount directly into the ceiling
Attachable to “I”-beams with mounting clips
A pendulum-style installation kit is available
Typical sizes include: 18", 24", 30", 36" and 42" diameter mirrors

180.degree semi-hemispherical, ceiling or wall mounted mirror

This popular mirror provides maximum visibility at 3-way “T”-intersections, whether approaching from the center, right or left. Available with a fully enclosed top and back, with hardware for suspended installations in warehouses and manufacturing facilities; smaller sizes come with ceiling mounting clips and are also pre-drilled for direct screw-mounting, if preferred.

90.degree semi-hemispherical, ceiling or wall mounted

Ideal for “L”-shaped corridors and lanes, the 90° semi-hemisphere allows superb viewing around blind corners to prevent costly and dangerous collisions between employees and equipment moving throughout the facility. When flush-mounted, the 90° semi-hemisphere fits perfectly into a corner.

Full Round Convex Observation Mirror

Ideal for in-plant traffic control safety where employees and equipment cross paths. This style also used for outdoor installations in blind alleys, loading dock areas and parking ramps or garages.

Typical sizes include: 12”, 16”, 18", 24", 26”, 30" and 36" diameter mirrors

Oblong Convex Mirror

For use for in-plant safety and detailed vision situations. The bright distortion-free image provides excellent vision for quality inspection of assembly lines or machinery production areas.

Forklift Mounted Mirror

Installed on any typical forklift will help eliminate an operators blind spot. Reduces operators reflected image while amplifying the total view of his or her surroundings. Operators are encouraged to utilize safety mirrors in addition to all other company-mandated safety devices and procedures.