Wire Partitions
Partitions can be used to build free standing, secured storage areas or divide large buildings into smaller sections. The solution sets up fast with standard hand tools, is secure once in place, and is easy to reconfigure as needs change. The open but secure design, allows free circulation of your building's lighting, HVAC, and fire suppression systems.
Wire partitions are a simple and economical solution for securing valuable items or creating a protective barrier around automation equipment.
Wire Partition Applications
- Tool cribs / Supply parts area for ready access to tools and supplies while still maintaining security
- Safety barrier around automated equipment such as industrial robots, vertical lifts, etc.
- Protection from high voltage equipment or systems
- Security areas and traffic flow reduction allowing for versatility within your environment
Benefits of Wire Partitions
Simplicity
Almost any layout can be created with the use of 20 basic panels. With this versatility, there is no need to distinguish between wall, ceiling, or filler panels, thus allowing panels to be bolted between posts. No stiffeners are needed.
Versatile and Adaptable
Damaged panels can be easily replaced, and no special panels are required when stacking from floor to roof. Instead, floor to roof applications are accomplished by modifying the posts, making it simple, easy, and economical to create custom applications since standard parts are used.
Rigid
Mechanical anchors hold posts firmly, eliminating any need to drill post holes that could permanently damage your floor surface. Regardless of partition height, connections will always a panel to a post. Posts are set on maximum 10’2” centers and have base plates welded to them for direct anchoring to the floor.
Fast
These wire partition systems are designed with a building block approach, thus reducing installation time.
Secure
With pre-engineered panels there is no need to seal off areas to protect against dust and the mess associated with paint, mortar, spackle, tape, etc. You are not faced with detailed cleaning of equipment afterwards. Eliminating these related costs means very substantial savings for modular construction.
Availability
All standard panels are in stock and ready for shipment within 48 hours of your order receipt.
Wire Partition Specifications
- Comes in 10 different widths, 1' to 10' in one foot increments
- Two heights: 4'-0" and 5'-0"
- Mesh: 10 gauge wire woven into 2" x 1" rectangular openings
- Frame: 1-1/4" x 1-1/4" x 1/8" steel angle
- Doors: hinged, tunnel, and sliding doors available. Service windows are also available.
- Door openers: electric, pneumatic, hydraulic, and sliding door available
- Galvanized partitions: 8 gauge wire woven into 1-1/2" mesh to prevent warping during the galvanizing process
Contact Us
1-800-772-0464
