The Material Handling Blog


Read More Articles

Parts of Robotic Palletizer Diagram

Robotic Palletizing vs. Conventional Automated Palletizing

Bastian Solutions | 26 January 2011

When a business decides to automate its palletizing process, there are essentially two choices: robotic or conventional.  What are the differences between these two technologies?  What are the advantages? First, let's discuss robotic palletizers.  The key component in a robotic palletizer is....drum roll guessed it, a robot.  A robot is usually defined as an electro-mechanical machine guided by computer or electronic programming, and thus, able to do tasks on its own. In palletizing applications, a robot can consist of a 2-axis, 3-axis, or 4-axis gantry robot.  However, more often a robot consists of a 4-axis articulated arm that's mass produced by companies such as FANUC or ABB Robotics.  In some cases 5- or 6-axis articulated arms are also required should a product need to be tilted or rotated.

Other components in a robotic palletizer consist of the following:

  1. Infeed conveyors that deliver products to the robot
  2. Pallet dispensers that automatically deliver a single pallet to the robot from a stack of pallets
  3. Outfeed conveyors that take pallets with full stacks away from the robot
  4. Automatic slip sheet or tier sheet dispensers
  5. Safety devices such as fencing and light curtains

Another key component is the EoAT (End of Arm Tool) which is often custom-designed to handle one or more specific products.

A robotic palletizer offers several key advantages over conventional palletizers:

  1. Typically takes up less space
  2. Can adapt easier to accommodating different pallet patterns and product types
  3. Can handle up to 1000 kg (2,200 lbs)
  4. Can handle many different product types, including cases, bags, pails, bottles, batteries, cubes of scrap metal, and plastic containers
  5. Can simultaneously handle multiple infeeds of different SKUs
  6. A single articulated arm can typically handle up to 4 different SKU's.  If the articulated arm attached to a moving track or a gantry style robot is utilized, 8 to 12 SKU's can be handled simultaneously by a single robot. This of course depends on important criteria, such as pallet stacking patterns and case rates.
  7. Price can sometimes be less, especially when looking at four or more simultaneous infeeds.
  8. Palletizing rates can vary anywhere from 8 to 30 cases/min for a single robot depending on stacking patterns, requirements, and if the robot is picking a single product, rows of product, or full layer of products.
  9. Mixed case palletizing is possible

Now let's look at conventional palletizers.

A conventional palletizer is made up of the following key components:

  1. Infeed conveyor
  2. Case turner (if case rotation is required)
  3. Row forming conveyor with integrated pusher
  4. Layer forming table with stripper plate and layer-squaring device
  5. Elevator that lifts full layers of products
  6. Pallet dispensers
  7. Slip/Tier sheet dispensers
  8. Full load pallet discharge conveyor

Parts of a Conventional Palletizer Diagram A conventional palletizer can be broken down into low-level and high-level palletizers.  A low-level palletizer starts with products being conveyed and rotated as required by the pallet pattern.  The cases then hit an end stop and back up against one another to form a row.  This row is pushed onto a layer-forming table. Rows are continually built in this manner until an entire layer is formed on the layer-forming table.  The layer-forming table then raises or lowers to the correct height, and a stripper plate underneath the layer of products retracts gently depositing products onto a pallet.  Layers are continuously deposited in this manner until a fully-loaded pallet is formed.  The completed pallet is then discharged, an empty pallet is dispensed into the same location, and the process repeats. A high-level palletizer operates in a similar manner to a low-level palletizer, except instead of raising and lowering full layers of cases and depositing them onto a pallet, the case layers remain stationary and the pallet is raised and lowered as required.  High-level palletizers also allow products to be formed into layers at much higher speeds than low-level palletizers.

Advantages of Conventional Palletizers:

  1. Easier to troubleshoot, support, and operate without special training
  2. A single unit can handle up to 2 -3 SKU's simultaneously
  3. Typically will cost less than a robotic palletizer with a single or dual infeed.
  4. Up to 15 cases/min for low-level palletizers
  5. Up to 150 cases/min for high-level palletizers
  6. Palletizes cases, bags, and other cube-shaped products

Which type of palletizer would you choose: Robotic or Conventional?  Why?


Author: Bastian Solutions


Forklift Accessories says:
8/28/2018 10:07 AM

Robotic and conventional palletizers are both good choices for businesses looking to automate their material handling processes. However, I have to favor conventional palletizers since they're more user-friendly. I don't really have a knack for complex gigs and contraptions.

A Truly Versatile And Modular Tray Palletizer, That Is Also Affordable? | Affordable Palletizer says:
8/28/2018 10:07 AM

[...] to seriously consider the benefits that a modular and versatile tray packing solution can offer.Considering their reputation for durability and versatility, you might expect that our IPLA tray pal...ineering, we can deliver these solutions at a low entry level price. Unlike most layer formation [...]

Leave a Reply

Your email address will not be published.


Thank you for your comment.

Rate this Blog Post:

Spell Check

Related Posts


Upcoming Events

Bastian Solutions MODEX 2022

Don't miss this supply chain industry event on March 28 - 31 in Atlanta, Georgia.