Toyota Center-Controlled Rider & Core Tow Tractor

Automated Vehicles Designed for Maximum Fulfillment

Automated vehicles are changing the way warehouses define efficiency. Guided by natural features navigation, Toyota's Center-Controlled Rider and Core Tow Tractor automated forklifts are engineered to improve throughput without need for modifications to your facility. Gain an upper hand against the competition with these warehouse AGVs.

Both of these AGVs are built with the same reliable motor, drivetrain, body, and navigation system. Whether you need a better way to move pallets or tow carts, these Toyota driverless vehicles are an ideal solution to improve safety, increase efficiency, and free up workers to accomplish more valuable tasks.

Ready to find your solution?

Talk to an engineer

warehouse-AGV-Toyota-AGF-Group-Shot-3-automated-fork-truck-center-controlled-rider-tugger

TOYOTA Core Tow Tractor (8TB50A)

The Toyota Core Tow Tractor is a tugger-type automated guided vehicle designed to pull carts or cart trains to wherever they are needed within a facility. With natural features navigation, the Toyota Core Tow Tractor uses Omron LiDAR scanners to identify features in its environment and match them to a virtual map. This allows the AGV to determine its location and move along programmed paths to designated pick up and drop off points. Multiple routes and "missions" can be easily programmed and changed at any time from a computer or automatically if connected to WMS.

Travel Speed (manual): Full load 5.8 mph, no load 8.8 mph
Automated Travel Speed: Varies by capacity, from 4 mph at 4,850 lbs to 1.1 mph at 10,000 lbs
Maximum Towing Capacity: 10,000 lbs
Drawbar (Continuous): 250 lbs
Drawbar (Maximum): 750 lbs

TOYOTA Core Tow Tractor

Toyota Center-Controlled Rider (8HBC40A)

The Toyota Center-Controlled Rider is an automated guided forklift (AGF) designed to pick up and move pallets to wherever they are needed within a facility. With natural features navigation, the Toyota Center-Controlled Rider uses Omron LiDAR scanners to identify features in its environment and match them to a virtual map. This allows the AGF to determine its location and move along programmed paths to designated pick up and drop off points. Multiple routes and "missions" can be easily programmed and changed at any time from a computer or automatically if connected to WMS.

Travel Speed (manual): Full load 6.2 mph, no load 8.8 mph
Automated Travel Speed: Varies by capacity, from 5 mph at 5,732 lbs to 2.7 mph at 7,054+ lbs
Fork Length: 48” (1219 mm), 60” (1524 mm), 72” (1829 mm), 84” (2134 mm), and 96” (2438 mm).
Fork Width: 10 in (254 mm)

TOYOTA Center-controlled rider